@article { author = {کیانی, غلامرضا and کریم زادقویدل, ایوب}, title = {Experimental investigation of carbon nanotube length distribution by utilization of scanning electron microscope}, journal = {Journal of New Approaches in Iranian Scientific Laboratories}, volume = {3}, number = {2}, pages = {11-14}, year = {2019}, publisher = {University of Maragheh}, issn = {‪۲۵۸۸-۶۴۰۱}, eissn = {‪۲۵۸۸-۶۴۱X}, doi = {}, abstract = {Due to the special properties, carbon nanotubes(CNT) are attended by many researchers and their applications have been commercialized in many tasks. The high length to diameter ratio called aspect ratio is one of the main difference between CNTs and other nano-particles. Thermal properties of nanofluid and mechanical and electrical properties of polymer based contain CNTs are directly dependent on their length. The current methods for dispersing and separating of nano-particles agglomerations by exerting the damage on the CNTs structure change significantly their length distribution. So, the length distribution after CNTs dispersing and separating have a superior importance. The aim of this paper is the presentation of quick and confident method to prepare the sample and measurement technique for extracting CNTs length distribution by considering economical conditions and time saving. To reach this goal, CNTs were dispersed in chloroform by ultrasonic probe and their length distribution were analyzed by three methods of dynamic light scattered (DLS) atomic force (AFM) and electron scanning microscope(SEM). To prepare the required samples to analyze, the technique was offered named hot bed to prevent re-congesting of CNTs. It was cleared at the end of investigations that CNTs length distribution measurement by using SEM with picture analyzer software like ImageJ is an appropriate method according to this research purpose.}, keywords = {Carbon nanotubes,Length distribution,Hot bed,Agglomeration,Length fracture,Scanning Electron Microscope}, title_fa = {بررسی تجربی توزیع طول نانولوله های کربنی با استفاده از میکروسکوپ الکترونی روبشی}, abstract_fa = {نانولوله‌های کربنی بدلیل خواص منحصر به فرد، مورد توجه بسیاری از پژوهشگران قرار گرفته است و در بسیاری از موارد نتایج حاصل بصورت محصول تجاری سازی شده است. یکی از تمایزهای اصلی آن‌ها با سایر نانو‌ذرات در نسبت بسیار بالای طول به قطر آن‌هاست که نسبت وجهی نامیده می‌شود. خواص هدایت حرارتی نانو سیال‌های و خواص مکانیکی و الکتریکی نانوکامپوزیت‌های پایه پلیمری حاوی آن‌ها مستقیما تابعی از طول نانولوله‌هاست. روش‌های رایج پخش و جدایش نانو ذرات واردن کردن آسیب‌هایی به ساختار نانولوله‌ها، موجب تغییرات قابل ملاحظه‌ای در توزیع طول آن‌ها می‌شود. از این حیث بررسی توزیع طول پس از پخش و جدایش نانولوله‌ها از اهمیت خاصی برخوردار است. هدف مقاله حاضر ارایه تکنیکی سریع و مطمئن، جهت آماده‌سازی نمونه و نحوه اندازه‌گیری و استخراج توزیع طول نانولوله‌ها با صرف حداقل هزینه و زمان است. برای این منظور نانولوله‌های کربنی در کلرفورم توسط التراسونیک پروب پخش شده و توزیع طول آن‌ها توسط سه روش آنالیز تفرق دینامیکی نور، میکروسکوپ نیروی اتمی و روبشی الکترونی مورد بررسی قرار گرفته است. همچنین برای آماده‌سازی نمونه لازم جهت آنالیز، روشی تحت عنوان بستر داغ ارایه شده تا به کمک این روش از تجدید تراکم نانولوله‌ها ممانعت بعمل آید. در پایان بررسی‌ها معین گردید، اندازه‌گیری توزیع طول نانولوله‌ها با استفاده از میکروسکوپ روبشی الکترونی و یک نرم افزار آنالیز تصویر نظیر ImageJ مطابق با اهداف این تحقیق، روشی بسیار مناسب برای این منظور است.}, keywords_fa = {نانولوله‌های کربنی,توزیع طول,بستر داغ,کلوخه,شکست طول,میکروسکوپ الکترونی روبشی}, url = {https://jonaisl.maragheh.ac.ir/article_102489.html}, eprint = {https://jonaisl.maragheh.ac.ir/article_102489_d8dd47660d02717c9f6357bfc28b6b4f.pdf} }